在自由落体和气动输送中连续测量各种类型的粉尘、粉末和颗粒的质量流量。 用于20t/h以下固体质量流量在线测量的微波传感器。 用于气动稀相输送或机械送料后的垂直自由落体。

Description","SITRANS WF300 Series are low- to medium-capacity flowmeters for various product sizes, densities, and fluidities.","With weighing mechanics located externally, the WF300 Series solids flowmeters are unaffected by corrosive, abrasive, or hot materials.Handling a wide range of product sizes, densities, and fluidities including fine powders such as cement, they operate at process temperatures to +230 °C (+450 °F). The flowmeters help to improve final product, increase operating efficiency, and realize significant cost savings.","Operating with the appropriate SITRANS WFS300 sensing head and a microprocessor-based integrator package, the WF300 Series flowmeters provide a display of the flow rate, totalized flow, and alarms. Outputs are 0\/4 to 20 mA proportional to rate, and open collector output for remote totalization.","Dry bulk solids enter the flow guide producing a mechanical deflection as they strike the flowmeter sensing plate before continuing through the process unhindered. The LVDT in the sensing head converts the deflection of the horizontal force into an electrical signal. The integrator processes this signal into a display of flowrate and integrated total weight. The weighing process is immune to the effect of product build-up as only the horizontal force is measured.","WF330 flowmeters are totally enclosed, with external weighing mechanics, operating with corrosive, abrasive or hot materials. The WF350 operates with aerated gravity conveyors, and includes integral vents and baffles for air separation. For applications with little available headroom, the WF340 flowmeters provide the answer.","Detail","Benefits

应用领域，框架结构提供了一个简单的安装选项，用于对输送带进行改造，以实现散装固体的非接触式吞吐量测量。，WEIGHTRAC 31是一种基于辐射的传感器，用于精确测量散装固体的流量。它是所有行业输送带和螺旋输送机质量流量测定的理想选择。由于其框架结构，重量RAC 31可以简单地改装到传送带上

BinMaster Flow Detect 1000流量/无流量传感器由两个组件组成：安装在气动管道、重力溜槽或给料机上的遥感器探头，以及安装在用户可在操作期间读取控制台的区域内的控制台。该系统通过通知用户固体或粉末材料正在流动，并在流动状态发生变化、断电或遥感器探头与控制台之间的通信中断时向用户发出警报，从而促进连续高效的操作。

全面颠覆现场计量介质重量只能由称量得出正确结果的观念。针对固态物体质量测量可在流动中直观的显示出来物料重量，并可和客户自动化控制系统连接，实现智能化控制。固体流量计能同时显示瞬时流量、累积流量以及波动曲线。满足多种工艺需求：灌装定量给料、定量装车、生产线计量等

The CentriFill™ 3000 is a fully automatic filling system that integrates a CentriFill™ head with a mounted, motorized conveyor system, and the required sensors and electronics controllers required to accurately move, position and fill containers, boxes or bags and then move the filled containers onward through your process. The fill cycle is fully automated and all of the processes are controlled with the integrated CentriFill™ electronics package. The automatic fill cycles can be controlled locally via the CentriFill™ electronics or can be integrated into your process' PLC control system. A variety of custom options are available for the CentriFill™ 3000 filler system as well.

Multicor®质量流量计系列使用粒子加速度及其合力的科学，以+/-0.5%的精度测量流量和总重量。空间效率和整体可靠性使Multicor®成为喂料、测量和配料应用（涉及合理自由流动的干燥材料）的理想选择。

Multicor®由一个分区测量轮组成，安装在中央防尘罩内的驱动轴上。驱动轴由安装在Multicor®外壳外部的电机驱动。材料通过偏心入口进入装置，并通过测量下方的中心出口排出车轮。英寸操作时，测量轮以恒定速度旋转。进入装置的材料流入测量轮顶部，并沿径向向外偏转，产生科里奥利力。Multicor®将此力视为由应变计称重传感器检测到的扭矩变化。称重传感器的输出经过电子处理，以产生准确度为+/-0.5%的流量和总重量值。最重要的是，与市场上其他流量计不同，Multicor®的性能不受材料密度、摩擦或进料下降高度的影响。