Cynergy3 / Sensata FS15A 流量控制器

Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. Flow switches are ideally used in water but can be used in weak acidic liquids.Mainly for use with hot or cold water, however they may also be used with a wide range of chemicals. Pressure rating 150psi maximum. Switching current 1A dc or ac (rms). Switching voltage 240V dc or ac (rms). Switching power 15W (15VA) resistive loads. Operating temperature 85°C maximum. Vertical or horizontal mounting. Standard compression or push fit fittings. WRAS approved for use in cold water. Complete with a 250mm leadMaximum Flow Rate = 2 L\/minElectrical Connection = CableControl Output = RelayMounting Style = Horizontal or VerticalDisplay Screen = NoPipe Diameter Range = 15 mmMaximum Operating Temperature = +85°C

产品详细信息

Cynergy3 流量检测开关 Cynergy3 流量检测开关的最大流量为 2L / 分钟、设计用于压力高达 10bar 和温度高达 85°c 的液体流量系统其设计基于移动磁铁和具有低流量限制的固定簧片开关。
此开关设计仅用于液体、不应用于具有大量固体颗粒的系统。
此流量开关可水平或垂直安装、并具有最小流量限制。
它特别适用于水、但可用于弱酸性液体。
注意：不可用于任何氯化液体。
特点和优势 15mm 和 22mm 管型15mm 管中提供低流量型号释放流速为 0.3l/min可在温度高达 85°c 的冷热水中使用主要用于热水或冷水 但是、它们也可用于各种化学品最大额定压力为 150psi切换电流为 1A 直流或交流（有效值）切换电压为 240V 直流或交流（有效值）切换功率为 15W （ 15VA ）电阻性负载 应用 流量测量和剂量控制 工业使用 认证 经 WRAS 认证