Advanced Sensor Technologies, Inc. Industrial Grade pH Sensor pH电极

分享
  • 后询价或查看价格

  • Industrial Grade pH Sensor

  • pH电极

  • ASTI (Advanced Sensor Technologies, Inc.)

  • 请咨询供应商

  • ASTI (Advanced Sensor Technologies, Inc.)

联系销售
专家支持

虽然宙斯u201e u00a2 pH传感器仅在上述配置中可用,但所有其他IOTRON u201e u00a2系列pH传感器都可以根据您的具体应用需求定制。如果您喜欢此选项,请查看我们的传感器概述网页以选择最适合您需要的自定义产品线。所有其他IOTRON„¢系列pH传感器都没有库存,因为它们是为满足特定要求而制造的。提前期通常是相对正常的,因为大多数组合的所有必要组件都有充足的库存,而且可用性仅受实际制造时间、订单处理和生产队列中时间的限制。为所有宙斯u201e u00a2传感器配置选择了感兴趣的独特功能:,特定功能至ZEUS„¢ pH传感器的智能数字配置:

特性

  • Best reference service lifetime in process industry through the proprietary and novel non-porous, cross-linked conductive polymer technology with triple junction is standard for all ZEUS„¢ sensor configurations.
  • Leading novel and proprietary solid-state industrial pH sensor & ORP sensor design and technology offers the best possible service lifetime for the most difficult severe service and difficult process measurement applications. Review the Competitive Advantages of Design & Technology for IOTRON„¢ & ZEUS„¢ Industrial pH & ORP Sensors webpage for details about the core technology underlying the ZEUS„¢ pH sensors.
  • The extremely rugged industrial grade construction including an extra thick sensor body housing makes ZEUS„¢ sensors the ideal choice to operate in most any installation in a temperature range at pressures up to 200 psig for 1"MNPT screw-in type inline style installations or immersion & submersible type installations with aggressive abrasives that can induce mechanical wear. The 5.6mm (0.22") thickness for the back of the sensor body minimizes the impact of the process exposure due to mixers, vibration and other stress induced by rugged field installations.
  • 固态参考高度抗脱水和我们的厚壁抛物型玻璃几乎不透裂,即使在高压和流动条件下。
  • 支持在-15至+150摄氏度范围内连续使用,以处理大多数工艺条件。
  • 标准特性所有宙斯传感器配置包括耐氨气、氯气和硫化物气体,在大多数有机介质和挥发性溶剂存在的情况下,可在-0.5到+14.5的范围内操作pH值介质。
  • All ZEUS„¢ sensor configurations include ACCU-TEMP Fast Response Pt1000 Temperature Compensation (TC) Element and 4 each Ultra-Thick 3.0mm (0.12") Protective Tines to avoid pH glass breakage in handling and field use
  • Universal and 5-wire differential preamplifier configurations of ZEUS„¢ pH sensors include Solution Ground Liquid Earth with Hastelloy® C-276 Material of Construction to ensure suitability for most any process chemistry
  • UNIVERSAL CONFIGURATION terminated with tinned leads and the wiring schematic detail can be used to interface to your mating OEM pH transmitter (see list of supported transmitters below).
  • WITH CONVENTIONAL PREAMPLIFIER CONFIGURATION OR WITH 5-WIRE DIFFERENTIAL PREAMPLIFIER CONFIGURATION are terminated with quick disconnect IP67 & NEMA 6P rated waterproof and corrosion resistant snap Q7M/Q7F connectors as detailed in the respective installation guides linked above.
  • Back of sensor 1.25" MNPT threads are sealed with robust waterproofing assembly so that all ZEUS„¢ pH sensors are suitable for use in immersion or submersible type applications as well as for inline use.
  • 标准的扳手平接特性允许将传感器固定在螺纹1英寸npt内嵌工艺连接或1.25英寸npt浸入管中,而不会损坏传感器本体。
  • ZEUS¢pH传感器采用RADEL®(聚苯基砜,PPSU)传感器本体结构材料和KYNAR®(聚偏氟乙烯,PVDF)制造,可处理最困难的现场过程测量应用。
  • 厚壁抗破裂低剖面抛物线ph玻璃元件,适用于泥浆和粘性工艺介质,可延长艰难设备的使用寿命。
  • iotron和zeus电化传感器的工厂保修声明:请在购买前审核,如有问题请向工厂咨询。
  • 这种固态专利参考系统几乎不受绝大多数气体、离子和溶剂的侵入,有利于最小的清洗和校准,最大的使用寿命。
  • Care must be taken not to over-tighten any sensor to avoid damage during commissioning or insertion and removal from process for cleaning, recalibrating or replacement during maintenance. Consult ASTI factory for assistance to ensure best practice care and use. The general care and maintenance guide for pH sensors is the starting basis but inquire to the ASTI factory for specific best practice instructions for your particular application for optimal results.
  • 关于这些建筑材料的耐化学性、热性能和机械性能的技术信息在本网页的下面进一步提供,以帮助确认是否适合您的预期工艺用途。
  • 这种坚固的厚壁、低剖面、抗破裂抛物线pH玻璃是常规前置放大器或5线差分前置放大器ZEUS¢pH传感器配置的标准配置
  • 集成智能数字板在传感器中存储校准和变送器配置
  • 防水nema 6p快速断开hiq4m卡扣式耐腐蚀连接器
  • 高达610米(2000英尺)的噪声不敏感数字电缆hiq4f扩展
  • 真正的即插即用传感器与自动加载的校准值热交换
  • 可在实验室或车间方便地校准,并可在现场安装快速断开传感器
  • 先进的自动读取算法可重现&操作员独立校准
  • 自动识别4.00、6.86、7.00、9.18和10.00 NIST可追踪pH缓冲液,并内置温度引起的pH值变化校正
  • 用1点、2点或3点校准,在酸性或碱性范围内的可靠读数
  • 使用先进的hiq windows软件或任何3tx hiq ph变送器进行校准
  • 整个变送器配置可下载至传感器或从传感器上传至智能3tx hiq ph变送器,用于现场安装的高级管理
  • 存储最后五个偏移(1点),坡度(2点和3点)和温度校准
  • See 3TX-HiQ webpage for complete set of features & functionality for the smart digital platform
  • 所有ZEUS传感器配置的标准配置是通过专有和新颖的无孔、交联导电聚合物技术和三联结技术实现的过程工业最佳参考使用寿命。
  • Standard features all ZEUS„¢ sensor configurations include Ammonia, Chlorine and Sulfide Gas Resistant and can operate pH media from -0.5 to +14.5 in the presence of most organic media & volatile solvents.
  • 宙斯pH传感器的通用和5线差分前置放大器配置包括溶液接地液体接地,采用Hastelloy®C-276结构材料,确保适用于大多数工艺化学
  • ZEUS„¢ pH sensors are manufactured with RADEL® (Poly-Phenyl-Sulfone, PPSU) sensor body housing materials of construction and KYNAR® (Poly-Vinylidene-Fluoride, PVDF) to handle even the most difficult field process measurement applications.
  • 厚壁抗破裂低剖面抛物线pH玻璃元件,适用于泥浆和粘性工艺介质,可延长艰难设备的使用寿命。
  • This type of rugged thick-wall, low-profile, break-resistant parabolic pH glass is standard the WITH CONVENTIONAL PREAMPLIFIER OR WITH 5-WIRE DIFFERENTIAL PREAMPLIFIER ZEUS„¢ pH SENSOR CONFIGURATIONS
  • 防水NEMA 6P快速断开HiQ4M卡扣式耐腐蚀连接器
  • 自动识别4.00,6.86,7.00,9.18和10.00 nist可追踪的ph缓冲液,内置校正温度引起的ph缓冲液值的变化
  • 使用先进的HiQ Windows软件或任何3TX HiQ pH变送器进行校准

Industrial Grade pH Sensor pH电极技术参数

点击查看 0 个替代产品
规格项 参数值 勾选搜索替代
性 能
工作压力范围 200 psi (141 m H2O)
pH 值范围 -0.5000 to 14.5 ph
环 境
工作温度 5 to 302 F (-15 to 150 C)
物 理
电极材料 Epoxy or Polymer
外观及安装选项 In-Line
更多规格
产品类别 pH Electrodes

产品替代

找到 个替代产品

化学传感器交流圈

约3圈友等你加入

    加载中···

    专家支持

    0 / 300

    选择图片

    确定提交

    提交成功

    系统自动将您的问题推送给专家解答

    查看专家解答
    请扫码进入传感圈小程序

    如何查看专家解答您的问题?

    1
    2
    3
    4