"Basic operationCover the holes at the bottom of the orifice and pour in the liquid to be measured. Make sure that the Flow Cup Viscometer is completely filled. Use the glass plate to scrape off any excess liquid from the edge of the Flow Cup Viscometer. Uncover the holes at the bottom of the orifice. Negative pressure will keep the liquid in the cup until you're ready to begin measuring. Active a stopwatch (not included) while simultaneously removing the glass plate from the cup horizontally. As soon as the flow is interrupted for the first time, stop the watch and write down the time.Note: When using a Flow Cup Viscometer, it is very important to make sure that the instrument is cleaned thoroughly after each measurement, as residue in the orifice and cup can jeopardize the accuracy of future measurements. Scratches also can cause inaccurate results.***Test stand sold separately. See also for recommendations.***"