Texas Instruments TMP42x/TMP42x-Q1 Remote & Local Temperature Sensors are remote temperature sensor monitors with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs. Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to configure the device. The TMP42x/TMP42x-Q1 include series resistance cancellation, programmable non-ideality factor, wide remote temperature measurement range (up to +150°C), and diode fault detection. The TMP42x-Q1 devices are AEC-Q100 qualified for automotive applications.
TMP423AQDCNTQ1 板上安装温度传感器技术参数
| 规格项 | 参数值 | 勾选搜索替代 |
| 更多规格 | ||
| RoHS | Y | |
| 接口类型 | 2-Wire, I2C/SMBus | |
| 产品 | Temperature Sensors | |
| 说明 | 板上安装温度传感器 AEC-Q100 Automotive 3Ch Remote Temperature Sensor 8-SOT-23 -40 to 125 | |
| 最大工作温度 | + 125 C | |
| 最小工作温度 | - 40 C | |
| 封装 / 箱体 | SOT-23-8 | |
| 封装 | Reel | |
| 系列 | TMP42x-Q1 | |
| 商标 | Texas Instruments | |
| 安装风格 | SMD/SMT | |
| 工作电源电流 | 400 uA | |
| 工厂包装数量 | 250 | |
| 电源电压-最大 | 5.5 V | |
| 电源电压-最小 | 2.7 V | |
| 输出类型 | Digital | |
| 子类别 | Sensors | |
| 产品类型 | Temperature Sensors | |
| 资格 | AEC-Q100 | |
| 分辨率 | 12 bit | |
| 关闭 | Shutdown | |
| 配置 | Local, Remote |
产品替代
资料下载
| 文件名称 | 大小 | 操作 |
|---|---|---|
| Texas_Instruments_PCN20231109000_20231109140525419 | 332.93 KB | 下载 |
声明：本产品内容及配图源自互联网收集或平台用户自行上传，目的在于传递更多信息，并不代表本网赞同其观点或证实其内容真实性，不承担此类作品侵权行为的直接责任及连带责任。如涉及作品内容、版权等问题，请联系本网处理，侵权内容将在一周内下架整改。
板上安装温度传感器相关品牌
板上安装温度传感器同类产品
加载中···
